Home > Products >Environmental Test Chamber
"INLAB"AUTOCLAVE - VERTICAL

ENVIRONMENTAL TEST CHAMBER ORDINARY MODEL

Double walled construction exterior is made of sheet steel powder coated and interior is of stainless steel 316 quality. A flush fitting insulate door has leak proof gasket. The shelf position of the trays is adjustable. The rear chamber of the interior is fitted with a refrigeration evaporator, heater and air circulating fan to create a positive air flow throughout the chamber. A hermetically sealed compressor below the chamber provides temperature below ambient. The same compartment houses a boiler with an immersion heater and water level controller for creating humidity. The control panel is provided at the top and comprises on off switch. Solid state digital electronic temperature controller cum indicator ,humidity controller cum indicator with display of humidity in percentage. Indicating lamps and protective fuses.

TECHNICAL DATA (ECONOMY MODEL)

TEMPERATURE RANGE: 10 TO 60 DEG. C.
ACCURACY: ± 1DEG. C.
HUMIDITY RANGE: 40% TO 95%
ACCURACY: ± 3%
CAPACITY: 6 CU FT.
SIZE: 50W X 43D X 82H

CAPACITY: 10 CU. FT.
SIZE: 58W X 51D X 97H

CAPACITY: 12 CU FT.
SIZE: 62W X 53D X 102H


OUTSIDE ALSO MADE OF SS 304 QUALITY

CAPACITY: 6 CU FT.
SIZE: 50W X 43D X 82H

CAPACITY: 10 CU. FT.
SIZE: 58W X 51D X 97H

CAPACITY: 12 CU FT.
SIZE: 62W X 53D X 102H


"INLAB"AUTOCLAVE - VERTICAL

ENVIRONMENTAL TEST CHAMBER MICRO PROCESSOR MODEL

Double walled construction exterior is made of sheet steel powder coated and interior is of stainless steel 316 quality.. a flush fitting insulate door has leak proof gasket. The shelf position of the trays is adjustable. The rear chamber of the interior is fitted with a refrigeration evaporator, heater and air circulating fan to create a positive air flow throughout the chamber. A hermetically sealed compressor below the chamber provides temperature below ambient. The same compartment houses a boiler with an immersion heater and water level controller for creating humidity. the control panel is provided at the top with micro processor controller with the following features.

Menu driven 16 programme memory time /step : (1 to 540 min) total (16 x 9 hrs) - optional Temp./rh accurately controlled through microprocessor based controller Special feature allows user to operate compressor time delay adjustable from 10 to 180 seconds Warning of low water levels through pilot lampaudio visual alarm warning in case of increase in temperature or humidity. Built in safety circuit to cut off the system and stop the unit in case of malfunctioning of microprocessor 6 digit 7 segment display of real time clock along with set and actual temp. And rh Display is digital system and is user friendly. direct measurement of relative humidity in percentage

OUTSIDE MADE OF GALVANIZED STEEL POWDER COAT
PAINTED AND INSIDE MADE OF SS 316 QUALITY

SIZES:
6 CU FEET
H 820 mm x W 500mm x D 430 mm
CAPACITY: 170 LTRS
10 CU FEET
H 970 mm x W 580 mm x D 500mm
CAPACITY: 250 LTRS

12 CU FEET
H 1020mmXW 620mmXD530mm
CAPACITY: 325 LTRS


OUTSIDE ALSO MADE OF SS 304 QUALITY

6 CU FEET
H 820 mm x W 500mm x D 430 mm
CAPACITY: 170 LTRS

10 CU FEET
H 970 mm x W 580 mm x D 500mm
CAPACITY: 250 LTRS

12 CU FEET
H 1020 mmXW 620mmXD 530mm
CAPACITY: 325 LTRS


OPTIONAL:

PRINTER OUTPUT: CENTRONICS PRINTER OUTPUT
AVAILABLE FOR EPSONLX-300+ OR COMPATIBLE
PRINTER (FOR ON LINE PRINTING)

AND / OR

COMMUNICATION PORT: RS 232 SERIAL COMMUNICATION OUTPUT AVAILABLE TO HOOKUP TO A PC FOR DATA LOGGING

PC SOFTWARE: WINDOW BASED PC SOFTWARE PROVIDED ON CD ROM


SPECIFICATIONS:

  • Capacity – inner chamber
: Already given
  • Temperature
:10 deg to 60 deg C
  • Accuracy
: plus or minus 0.5 deg C
  • Humidity range
: 40% to 95%
  • Accuracy
: plus or minus 3% RH
  • Chamber is made of
:double walled
  • Inner chamber made of
: SS 316 quality
  • Outer chamber made of
: SS 304 quality / galvanized steel powder coated
  • Insulation
: glass wool
  • Circulation
: Forced air circulation
  • Shelves
: Shelf runners with perforated removable shelves
  • Door for visibility
: Made of acrylic
  • Controller
: Micro processor based PID type
  • Sensor
: Imported German for both temperature and humidity in one
  • Heating element
: Nichrome wire with SS fins
  • Cooling device
: Hermetically sealed.Kirloskar Copeland heavy duty Compressor (Compressor CFC free model)
  • Boiler Tank
: SS refractory type heater
  • Reservoir water tank having float valves Safety
: Low water cut off indication through pilot lamp
  • Temperature
: Protected by capillary thermostat with alarm
  • Alarm for high RH
: Provided
  • Validation
: Certificate for temperature and humidity provided Provision for inserting humidity and temperature probe for validation provided.

VALIDATION:

Validation using data logger (calibrated) with 8 Nos of Humidity probes shall be undertaken at your site if desired at  extra cost.  

INSTALLATION REQUIREMENTS:

  1. Servo stabilizer of 4 KVA rating is a must for the installation of Humidity Chamber to be provided by you.
  2. Water tank of 10 liter capacity either of stainless steel or of polythene with the tap with suitable hose  is also a must and to be provided by you.